| 1. | Two position signal
双位式信号机 |
| 2. | Position signal code
位置信号码 |
| 3. | Some gps receiver are more susceptible to positioning signal strength variations than others
某些gps接收器对定位信号的强度变化比较敏感。 |
| 4. | Simultaneously , rotor speed can be calculated indirectly by using the position signals
同时，利用转子的位置信号，还可以间接地计算出转速。 |
| 5. | It has made experiment detection and rectification with signal control technology for the position signal error
利用数字控制技术对位置信号误差角进行了实验检测及校正。 |
| 6. | 3 . feedback or measuring signal input pvin : pvin signal is valve position signal sent from actuator linear analog quantity or resistance signal , or field measuring signal . pvin is universal division number switchable input
采用高亮度led数码显示和高分辨率光柱显示比例显示，显示方式有二种：双屏数码显示双屏数码双光柱显示。 |
| 7. | In order to improving starting operating performance of dsem , the reason of the position signal error was analyzed , and the principle of the position signal error and the influence to torque ripple has been expounded
为了改善双凸极电机起动运行性能,本文分析了电机位置信号误差产生的原因,并阐述了位置信号误差的原理以及对转矩脉动的影响。 |
| 8. | It can directly control and drive the stepmotor and dc servomotor , and it can control the ac servomotor by controlling the ac transducer , and it also has the function of detecting the feedback position signal of photoelectric coder and induction phase shifter
它能直接控制和驱动步进电机和直流伺服电机,并可通过控制交流变频器对交流伺服电机进行控制,而且具有光电编码器和感应移相器位置反馈信号检测功能。 |
| 9. | The sampling rate of the system can reach 3704 sps , and the crank angle is 1 . 94 degree per sampling point corresponding to the crank speed of 1200r / min . in the mean time , the position signal of the piston could be collected by photo - electricity switch
本研究首先设计和实现了摩擦力采集电子电路系统，装置最大采样率可达到3704sps ，在曲轴转速为1200r / min时，对应曲柄转角1 . 94度采样点，并且可以采集用来确定活塞位置的光电开关的信号。 |
| 10. | It is composed of magnetic pulse sensor and control components , and is a built - in part inside distributor . it detects engine cranking position signal and cylinder signal via sensor , followed by treatment by control unit , thus controlling the on off of the current of control ignition coil to achieve the purpose of ignition . it has a function of auto closing regulation
该型产品是为微车无触点点火系统而研发的，它由磁脉冲传感器和控制组件构成，内置于分电器内，通过传感器检测发动机曲轴位置信号汽缸信号，然后经控制组件处理，控制点火线圈中电流的通断，从而达到点火目的，具有闭合角自动调整等功能。 |
